Low-profile cone charging stand
A low, wide cone that sits under a monitor and barely reads as hardware.
Overview
The W02323 is the cone flattened. Where the W02316 goes tall to gain radiating area, this one goes wide and low, which drops the arm height and puts the charging face closer to the desk surface. On a setup with a low monitor or an over-shelf, that is the difference between a stand that fits and one that does not.
The wide base is also the most stable in the range under a tablet, because the centre of gravity sits almost at desk level. Mesh wraps the full cone, so the acoustic behaviour is the same as the W02316 despite the shorter body. Stock colourways: black, white and gold.
Specification
Platform values shared across the range. Any of these can be changed for a volume order.
- Input
- 9 V / 4 A, 12 V / 3 A
- Wireless output
- 15 W max, magnetic
- USB-C output
- 5 V / 1 A max
- Charging efficiency
- ≥ 73%
- Audio
- 1 × 5 W speaker, Bluetooth 5.4
- Qi standard
- Qi2 / Qi2.2, up to 25 W
- Housing
- Low wide truncated cone, mesh wrap
- Arm
- Foldable, phone and tablet
- MOQ
- 100 pcs per model and colourway
- Lead time
- 7–10 days
- Terms
- EXW / FOB Shenzhen
- Certification
- CE / FCC / RoHS / WEEE
- Stock colours
- Black, white, gold
What it does differently
The design decisions behind SY-W02323, and what each one changes for the buyer.
Low arm height
The charging face sits close to the desk — the model for low monitors and over-shelves.
Widest base in the range
Centre of gravity at desk level, so a tablet on the arm cannot tip it.
Full mesh wrap
Same radiating surface treatment as the tall cone, in a shorter body.
Foldable arm
Phone at desk height or tablet at eye height.
Qi2 / Qi2.2 ready
Compatible with the 25 W Qi2.2 profile.
Where it fits
Three buying contexts this model is usually specified into.
Low-monitor and over-shelf desks
Where a tall stand would foul the bottom of the screen.
Retail counters
A low profile that does not block the customer's view across a counter.
Multi-person desks
Stable enough to be handled and re-angled all day.
Customisation without a new mould
Everything below changes on the existing tooling for SY-W02323.
Logo
Pad-print, laser etch or a metal badge on the housing face. Artwork in AI or PDF outline.
Housing colour
Any Pantone reference from 500 pcs. Stock colourways ship from 100 pcs.
Shade or grille
Fabric, print or metal finish depending on the model. Print runs from 300 pcs.
Retail packaging
White box, printed carton or a full colour sleeve with your own barcode and warning text.
Other models on this platform
Same charging platform, different housing. Mixed orders share tooling and carton specification.
Tapered cone charging stand
A tapered cone wrapped in speaker mesh — the largest acoustic surface in the stand range.
Sphere charging stand, two-tone shell
A full sphere with a gloss upper shell and a mesh lower half — the largest body in the range.
Box charging stand with speaker
A square box body with the simplest internal build in the range — the entry price point.